Voltage/mA Calibrator YH-7009(YHS-715)
YHS715 Volt/mA Calibrator is a source and measurement tool.
This Calibrator can be used in measurement or output 0 to 24 mA DC current loop, and 0 to 10 V DC voltage.

FEATURES

• Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution

• Measure voltage output process signals from PLCs, transmitters

• Source or simulate 24 mA loop current

• Source voltage to 100 mV or 10V

• 24V loop supply with simultaneous current measurement

• Enhanced voltage and current measure and source accuracy

• Improved battery life

• 250 ohm HART resistor with loop power

• Holster features test lead storage

• Compatible with toolpack magnetic hanging system

• Step and linear ramp output function

• Configurable zero and span settings

WARRANTY: one year

SPECIFICATIONS

Measure / Source mV		Range:	0 to 100 mV
		Resolution:	0.01 mV
		Accuracy:	0.02% + 2 counts
Measure / Source V		Range:	0 to 10 V
		Resolution:	0.001 V
		Accuracy:	0.02% + 2 counts
Measure / Source/ Simulate mA (% of span)		Range:	0 to 24 mA (-25% to 125%)
		Resolution:	0.001 mA
		Accuracy:	0.015% + 4 counts
		Note: Sink (simulate transmitter) Display mA or % of span
Loop Power	Range:	24 V dc
	Accuracy:	+/- 10%
	Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V
Display	Clear 5 digit LCD

24 mA Loop Current Volt / mA Operable RTD Calibrator with Seven Types , YH-7009

Cable Tracker Tester